Installing ARCserveIT from the command line

To install an ARCserveIT product from the UnixWare 7 command line:

1. Log in as root.

2. Insert the media containing the desired ARCserveIT product in the CD-ROM drive.

3. Mount the CD-ROM drive:
   
   /usr/sbin/mount -rF cdfs /dev/cdrom/c0b0t#l0 /mnt

   where /mnt is the mount point directory and t# is the SCSI ID of the CD-ROM device. For example, if your CD-ROM drive is set to a SCSI ID of 5, you would specify /dev/cdrom/c0b0t5l0.
   

4. Run the pkgadd utility to install the ARCserveIT components:
   
   pkgadd -d /mnt arcserve6

   The ARCserveIT package includes these components:

   • ARCserveIT Hardware Manager
     The ARCserveIT server information manager.

   • ARCserveIT GUI Manager
     The ARCserveIT front-end manager.

   • ARCserveIT Documentation
     The ARCserveIT online documentation.

   • SCO UNIX Client Agent for ARCserveIT
     ARCserveIT Client Agent for UnixWare 7.

   Select each package you wish to install and select Apply.

   You may need to respond to some additional prompts.

   ARCserveIT is installed in the /opt/ARCserveIT directory.

Note the following:

• To install Client Agents, see ``Installing and configuring Client Agents''

• For information on setting up ARCserveIT, see ``Configuring ARCserveIT''