Managing Hot-plugable controllers

The Hot-plug Manager interface

Use the Hot-plug Manager to remove, add or replace a PCI-based controller on a running system. You can start the Hot-plug Manager in any of these ways:

Choose SCOadmin from the SCO menu (above the SCO logo) on the CDE desktop, then select Hardware, then select Hot-plug Manager.
Start the SCOadmin launcher by entering scoadmin on the command-line, then select Hardware, then select Hot-plug Manager.
Enter scoadmin hotplug manager on the command-line (or abbreviate to scoadmin hot).

NOTE: You must have root privilege to run the Hot-plug Manager.

For general information about using SCOadmin managers, see ``Administering your system with SCOadmin''.

Hot-plug Manager menus

File Operations View Options

View HotPlug Log File Power On Detailed View Point Help

Exit Power Off Set Auto Refresh Preferences

Attention Indicator On Refresh Now

Attention Indicator Off Icon Legend

Add Driver

Resume Driver

Suspend Driver

Delete Driver

File	Operations	View	Options
View HotPlug Log File	Power On	Detailed View	Point Help
Exit	Power Off	Set Auto Refresh	Preferences
	Attention Indicator On	Refresh Now
	Attention Indicator Off	Icon Legend
	Add Driver
	Resume Driver
	Suspend Driver
	Delete Driver

Next topic: Preparing to add or replace a controller
Previous topic: Managing Hot-plugable controllers

© 1999 The Santa Cruz Operation, Inc. All rights reserved.
UnixWare 7 Release 7.1.1 - 5 November 1999