IPX/SPX operation

If you suspect that IPX/SPX is not operating correctly, you can use the following commands to verify its state:

• ipxinfo(1ipx) to check if errors are occurring with routing or in the IPX stack.

• drouter(1ipx) to display network and router information.

• nwdiscover(1Mipx) to see if a network interface is connected to an active network

• nwsapinfo(1ipx) to display information about what packets and frame types are in use on a network segment.

• nwsaputil(1Mipx) to display information about permanently advertised servers.