The following table lists the parameters for
configuring a printer from PCONSOLE.
Printer Configuration Parameters in PCONSOLE
Parameter
Options
Description
Print server
The print server the printer is assigned to. If no print server is
assigned, the field will say ``(None)''.
Printer number
The logical number assigned to the printer (0-254).
Printer status
Indicates whether the printer is printing, paused, stopped, or
waiting for a job.
Printer type
Parallel, Serial, UNIX, AppleTalk, Other/Unknown, XNP,
or AIO
You must select one of the listed types of printers. When the
``Other/Unknown'' option is used, the print server is provided with
information about the printer when you run NPRINTER.
This allows you to set up a printing slot for a printer without
specifying which port the printer is attached to.
Configuration
The ``Configuration'' options shown in this column are for parallel
printers. For information on other printer types, use Help.
This option takes you to a screen listing configuration options for
the type of printer you have selected. For example, the configuration
options for a parallel printer are listed here. Options for other
printer types are available in online Help.
Port
LPT1, LPT2, LPT3. This specifies the
port to which the parallel printer is cabled (workstation or server).
Default is LPT1.
Location
``Manual Load'' (remote) or ``Auto Load (Local)''. Only printers
cabled directly to the print server can autoload. The default is
``Manual Load (Local)''. Note: This field is not used by the
nprinter(1ipx)
daemon.
Interrupt
Lists available interrupt settings along with ``None (polled mode)''.
Most devices in the computer are configured to use a particular
interrupt. You should have recorded the interrupts your printing
ports use. Polled mode eliminates the potential for interrupt conflicts
and is the recommended option.
Address restriction
If you have selected the ``Manual Load'' option, allows you to set
address restrictions for a remote printer so that it can be loaded
only on a specified workstation or network. Default is No.
Network address
Lists the address of the network the printer can be loaded on.
Default is all.
Node address
Lists the address of the workstation or server (node) the printer
can be loaded on. Default is all.
Starting form
0-254
Indicates the form that the printer will use most often.
Buffer size in KB
3KB-20KB
Indicates the size of the buffer to be used with this printer. The
buffer size directly affects the amount of memory used by
NPRINTER and PSERVER. The default is 3KB.
Banner type
Text or PostScript
Indicates the mode to be used for printing banner pages. The mode
specified must match the default mode for your printer type.
Service mode for forms
Change forms as needed, Minimize form changes within print queues,
Service only currently mounted form, Minimize form changes across
print queues
Determines the mode in which multiple print jobs in a queue will be
serviced by the printer based on their forms.
Sampling interval
Default: 5 seconds
Specifies the interval, in seconds, at which the print server will
look for print jobs in the print queue. Values from 1 to 255 are
allowed.
Print queues assigned
N/A
Lists the print queues currently assigned to be serviced by the printer.
To assign a queue to this printer, highlight this field and press <Enter>.
Notification
N/A
Indicates the printing objects (including users) to be notified in
case of printer problems.