- Intro
- introduction to networking functions and libraries
- byteorder
- convert values between host and network byte order
- cs_connect
- application interface to the Connection Server
- cs_perror
- application interface to the Connection Server
- dial
- establish an outgoing terminal line connection
- dials
- establish an outgoing terminal line connection
- dn_comp
- compresses domain name
- dn_expand
- expands domain name
- endhostent
- closes TCP connection
- endnetent
- end network entry
- endnetgrent
- get network group entry
- endprotoent
- get protocol entry
- endservent
- get service entry
- ether_aton
- Ethernet address mapping operation
- ether_hostton
- Ethernet address mapping operation
- ether_line
- Ethernet address mapping operation
- ether_ntoa
- Ethernet address mapping operation
- ether_ntohost
- Ethernet address mapping operation
- ethers
- Ethernet address mapping operations
- freeaddrinfo
- release memory allocated to socket address information
- ftp
- FTP API operations
- ftp_accnt
- send user's account data to remote host
- ftp_api
- FTP API operations
- ftp_appfile
- append local file onto remote file
- ftp_ascii
- set data transfer type to ASCII
- ftp_binary
- set data transfer type to BINARY
- ftp_bye
- close the FTP connection
- ftp_chdir
- change directory on remote host
- ftp_command
- send FTP specific information
- ftp_dataconn
- open an FTP data channel socket
- ftp_del
- delete file on remote host
- ftp_dir
- list a directory on remote host
- ftp_getfile
- transfer file from remote to local host
- ftp_idle
- set idle time for the FTP connection
- ftp_initconn
- initialize and establish an FTP data channel
- ftp_login
- perform complete login to remote FTP server
- ftp_mkdir
- make a directory on remote host
- ftp_passwd
- send user's password to remote host
- ftp_prconnect
- establish FTP connection (control channel) with remote host
- ftp_putfile
- transfer file from local to remote host
- ftp_pwd
- get current working directory on remote host
- ftp_rmdir
- remove directory on remote host
- ftp_setport
- set the destination port number of the peer FTP server
- ftp_settype
- set data transfer type for FTP connection
- ftp_site
- send SITE command to remote FTP server
- ftp_user
- send user's name to remote host
- gai_strerror
- return description of getaddrinfo error
- getaddrinfo
- get socket address information related to a specified service location
- gethostbyaddr
- get network host entry by address
- gethostbyname
- get network host entry by name
- gethostbyname2
- get network host entry by name and address family
- gethostent
- get network host entry
- getkey
- retrieve an authentication key
- getnameinfo
- get name information related to an IP address and port number
- get_nderror
- get/set nderror value
- getnetbyaddr
- get network entry by address
- getnetbyname
- get network entry by name
- getnetconfig
- get network configuration database entry
- getnetent
- get network entry
- getnetgrent
- get network group entry
- getnetpath
- get netconfig entry corresponding to NETPATH component
- getprotobyname
- get protocol entry
- getprotobynumber
- get protocol entry
- getprotoent
- get protocol entry
- getpublickey
- retrieve public or secret key
- get_Rx_cserrno
- get/set Rx_cserrno value
- get_Rx_errno
- get/set Rx_errno value
- getsecretkey
- retrieve public or secret key
- getservbyname
- get service entry
- getservbyport
- get service entry
- getservent
- get service entry
- htonl
- convert values between host and network byte order
- htons
- convert values between host and network byte order
- if
- interface identification functions
- if_freenameindex
- free dynamic memory allocated by if_nameindex
- ifignore
- check for ignored network interface
- if_indextoname
- map an interface index to its name
- if_nameindex
- return an array of if_nameindex structures
- if_nametoindex
- map an interface name to its index
- IN6_IS_ADDR_LINKLOCAL
- test an IPv6 address
- IN6_IS_ADDR_LOOPBACK
- test an IPv6 address
- IN6_IS_ADDR_MC_GLOBAL
- test scope of an IPv6 multicast address
- IN6_IS_ADDR_MC_LINKLOCAL
- test scope of an IPv6 multicast address
- IN6_IS_ADDR_MC_NODELOCAL
- test scope of an IPv6 multicast address
- IN6_IS_ADDR_MC_ORGLOCAL
- test scope of an IPv6 multicast address
- IN6_IS_ADDR_MC_SITELOCAL
- test scope of an IPv6 multicast address
- IN6_IS_ADDR_MULTICAST
- test an IPv6 address
- IN6_IS_ADDR_SITELOCAL
- test an IPv6 address
- IN6_IS_ADDR_UNSPECIFIED
- test an IPv6 address
- IN6_IS_ADDR_V4COMPAT
- test an IPv6 address
- IN6_IS_ADDR_V4MAPPED
- test an IPv6 address
- inet
- Internet address conversion and testing
- inet_addr
- Internet address conversion
- inet_lnaof
- Internet address conversion
- inet_makeaddr
- Internet address conversion
- inet_netof
- Internet address conversion
- inet_network
- Internet address conversion
- inet_ntoa
- Internet address conversion
- inet_ntop
- Internet address conversion
- inet_pton
- Internet address conversion
- innetgr
- get network group entry
- netdir
- generic transport name-to-address translation
- netdir_free
- generic transport name-to-address translation
- netdir_getbyaddr
- generic transport name-to-address translation
- netdir_getbyname
- generic transport name-to-address translation
- netdir_options
- generic transport name-to-address translation
- netdir_perror
- generic transport name-to-address translation
- netdir_sperror
- generic transport name-to-address translation
- nlsgetcall
- get client's data passed via the listener
- nlsprovider
- get name of transport provider
- nlsrequest
- format and send listener service request message
- ntohl
- convert values between host and network byte order
- ntohs
- convert values between host and network byte order
- publickey
- retrieve public or secret key
- rcmd
- routines for returning a stream to a remote command
- res_init
- reads initialization file
- res_mkquery
- makes a standard query message
- resolver
- resolver routines
- res_query
- interface to server query mechanism
- res_search
- extended interface to server query mechanism
- res_send
- sends a query to name server
- rexec
- return stream to a remote command
- rexecve
- REXEC support routines
- rresvport
- routines for returning a stream to a remote command
- ruserok
- routines for returning a stream to a remote command
- rusers
- return information about users on remote machines
- rwall
- write to specified remote machines
- rx_act_exit
- REXEC support routines
- rx_fd
- REXEC support routines
- rx_free_conn
- REXEC support routines
- rx_proc_msg
- REXEC support routines
- rx_set_ioctl_hand
- REXEC support routines
- rx_set_write_hand
- REXEC support routines
- rx_signal
- REXEC support routines
- rx_write
- REXEC support routines
- sethostent
- use TCP socket for queries
- set_nderror
- set nderror value
- setnetent
- set network entry
- setnetgrent
- get network group entry
- setprotoent
- get protocol entry
- set_Rx_cserrno
- set Rx_cserrno value
- set_Rx_errno
- set Rx_errno value
- setservent
- get service entry
- taddr2uaddr
- generic transport name-to-address translation
- uaddr2taddr
- generic transport name-to-address translation
- yppasswd
- update user password in NIS database