Ejecting media

You can eject media from the device(s) within your changer using ARCserveIT's Device Manager, if your drives support this feature.

If you try to eject media from a drive that does not support the eject feature, ARCserveIT will think that the media has been ejected, even though it is still physically in the drive. You will need to walk over to the drive, eject the media, then put it back in for ARCserveIT to see the media again.

	If you try to eject media from a drive that does not support the eject feature, ARCserveIT will think that the media has been ejected, even though it is still physically in the drive. You will need to walk over to the drive, eject the media, then put it back in for ARCserveIT to see the media again.

Steps for ejecting media

Follow the steps below to eject media:

1. Select the device drive from which you want to eject the media.

`Accessing the Tape Library options'

2. Click the Eject button.